FRONT SEAT INNER BELT ASSEMBLY INSTALLATION

PROCEDURE


  1. INSTALL FRONT SEAT INNER BELT ASSEMBLY


    1. Install the front seat belt anchor plate.

    2. B001B2IE01
      *1 Protruding Part

      Install the front seat inner belt assembly with the nut.

      Torque:
      42 N*m  { 428 kgf*cm, 31 ft.*lbf }

      Note

      Do not allow the anchor part of the front seat inner belt assembly to overlap the protruding part of the front seat adjuster.

    3. Connect the 3 connectors and attach the clamps.

  2. INSTALL FRONT SEAT ASSEMBLY


    1. Install the front seat assembly Click here.

  3. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

  4. CHECK SRS WARNING LIGHT

    Click here

  5. INSPECT FRONT SEAT ASSEMBLY

    Click here