REAR SEAT CUSHION HEATER(for 60/40 Split Seat Type 40 Side) INSTALLATION

CAUTION / NOTICE / HINT

PROCEDURE

1. INSTALL SEAT HEATER ASSEMBLY

   
   

   1. Using a tacker, install the seat heater assembly to the rear separate type seat cushion cover with 45 new tack pins in the order shown in the illustration.

      Tech Tips

      
      

      • Secure the seat heater assembly so that it does not bend or stretch.

      
      

      • Set the seat heater assembly so that the nichrome wire is on the rear separate type seat cushion cover side.

      
      

      • The procedure listed below is for the RH side. When performing the procedure for the LH side, swap each number on one side with the number at the same position on the opposite side.

      

      Text in Illustration

      *1	Nichrome Wire	*2	Front Separate Type Seat Cushion Cover
      *3	Seat Heater Assembly	*4	Tack Pin
      *a	Seat Cover Side	*b	Pad Side
      *c	Tack Pin Fastening Position	-	-

2. INSTALL REAR SEPARATE TYPE SEAT CUSHION COVER

   Click here

3. INSTALL SEAT CUSHION COVER WITH PAD

   Click here

4. INSTALL REAR SEAT UNDER TRAY COVER RH

   Click here

5. INSTALL REAR UNDER SIDE COVER LH

   Click here

6. INSTALL REAR SEAT COVER

   Click here

7. INSTALL REAR NO. 1 SEAT HINGE SUB-ASSEMBLY RH

   Click here

8. INSTALL REAR NO. 1 SEAT HINGE SUB-ASSEMBLY LH

   Click here

9. INSTALL REAR NO. 2 SEAT PROTECTOR

   Click here

10. INSTALL REAR NO. 2 SEAT LEG SIDE COVER

    Click here

11. INSTALL UPPER SEAT TRACK RAIL COVER RH

    Click here

12. INSTALL UPPER SEAT TRACK RAIL COVER LH

    Click here

13. INSTALL REAR NO. 1 SEAT RECLINING COVER LH

    Click here

14. INSTALL REAR NO. 1 SEAT RECLINING COVER RH

    Click here

15. INSTALL RECLINING ADJUSTER RELEASE HANDLE RH

    Click here

16. INSTALL SEAT ADJUSTER BOLT COVER

    Click here

17. INSTALL REAR NO. 1 SEAT ASSEMBLY RH

    
    

    1. Install the rear No. 1 seat assembly RH Click here.