REAR SEAT CUSHION HEATER(for 60/40 Split Seat Type 40 Side) INSPECTION

PROCEDURE


  1. INSPECT SEAT HEATER ASSEMBLY

    A01WW2JE01

    1. Check the seat heater assembly.


      1. Heat the thermostat with a light.

      2. Measure the resistance according to the value(s) in the table below.

        Standard Resistance
        Tester Connection Condition Specified Condition
        A-1 - B-2 Seat cushion heater temperature 20°C (68°F) Below 1 Ω
        A-1 - B-1 3.19 to 4.32 Ω
        A-4 - B-2
        A-1 - A-4
        B-1 - B-2
        A-2 - A-3 temperature 10°C (50°F) to 30°C (86°F) 8.0 to 18 kΩ

        If the result is not as specified, replace the seat heater assembly.