FRONT SEAT CUSHION HEATER INSTALLATION

CAUTION / NOTICE / HINT

CAUTION:

Wear protective gloves. Sharp areas on the parts may injure your hands.

Tech Tips


  • Use the same procedure for RHD and LHD vehicles.

  • The procedure listed below is for LHD vehicles.

  • Use the same procedure for the RH and LH sides.

  • The procedure listed below is for the LH side.

PROCEDURE


  1. INSTALL FRONT SEAT CUSHION HEATER ASSEMBLY LH


    1. Using a tacker, install the front seat cushion heater assembly LH to the front separate type seat cushion cover with 45 new tack pins in the order shown in the illustration.

      Tech Tips


      • Secure the front seat cushion heater assembly LH so that it does not bend or stretch.

      • Set the front seat cushion heater assembly LH so that the nichrome wire is on the front separate type seat cushion cover side.

      • The procedure listed below is for the LH side. When performing the procedure for the RH side, swap each number on one side with the number at the same position on the opposite side.

      A01WUUAE01
      Text in Illustration
      *1 Front Separate Type Seat Cushion Cover *2 Front Seat Cushion Heater Assembly LH
      *3 Tack Pin *4 Nichrome Wire
      *a Tack Pin Fastening Position *b Seat Cover Side
      *c Pad Side - -

  2. INSTALL FRONT SEPARATE TYPE SEAT CUSHION COVER

    Click here

  3. INSTALL SEAT CUSHION COVER WITH PAD

    Click here

  4. INSTALL FRONT POWER SEAT SWITCH LH

    Click here

  5. INSTALL FRONT INNER SEAT CUSHION SHIELD LH

    Click here

  6. INSTALL FRONT SEAT INNER BELT ASSEMBLY LH

    Click here

  7. INSTALL FRONT SEAT CUSHION SHIELD LH

    Click here

  8. INSTALL FRONT SEAT CUSHION SHIELD RH (for Front Passenger Side)

    Click here

  9. INSTALL RECLINING POWER SEAT SWITCH KNOB

    Click here

  10. INSTALL SLIDE AND VERTICAL POWER SEAT SWITCH KNOB

    Click here

  11. INSTALL FRONT SEAT ASSEMBLY LH

    Click here