FRONT SEAT CUSHION HEATER INSPECTION

PROCEDURE


  1. INSPECT FRONT SEAT CUSHION HEATER ASSEMBLY LH


    1. Check the front seat cushion heater assembly LH.


      1. A01WRVIE01
        Text in Illustration
        *1 Connector A
        *2 Connector B
        *a

        Component without harness connected

        (Front Seat Cushion Heater Assembly LH)

        Measure the resistance according to the value(s) in the table below.

        Standard Resistance
        Tester Connection Condition Specified Condition
        A1 - A4 Front seat cushion heater assembly LH temperature 20°C (68°F) 3.42 to 4.18 Ω
        A4 - B1
        A4 - B2
        A1 - B2 Below 1 Ω
        A2 - A3 8.32 to 10.2 kΩ

        If the result is not as specified, replace the front seat cushion heater assembly LH.

  2. INSPECT FRONT SEAT CUSHION HEATER ASSEMBLY RH


    1. Check the front seat cushion heater assembly RH.


      1. A01WRVIE01
        Text in Illustration
        *1 Connector A
        *2 Connector B
        *a

        Component without harness connected

        (Front Seat Cushion Heater Assembly RH)

        Measure the resistance according to the value(s) in the table below.

        Standard Resistance
        Tester Connection Condition Specified Condition
        A1 - A4 Front seat cushion heater assembly RH temperature 20°C (68°F) 3.42 to 4.18 Ω
        A4 - B1
        A4 - B2
        A1 - B2 Below 1 Ω
        A2 - A3 8.32 to 10.2 kΩ

        If the result is not as specified, replace the front seat cushion heater assembly RH.