REAR SEATBACK HEATER(for 60/40 Split Seat Type 60 Side) INSTALLATION

CAUTION / NOTICE / HINT

PROCEDURE

1. INSTALL SEAT HEATER ASSEMBLY

   
   

   1. Using a tacker, install the seat heater assembly to the rear separate type seatback cover with 20 new tack pins in the order shown in the illustration.

      Tech Tips

      
      

      • Secure the rear seat heater assembly so that it does not bend or stretch.

      
      

      • Set the rear seat heater assembly so that the nichrome wire is on the rear separate type seatback cover side.

      
      

      • The procedure listed below is for the LH side. When performing the procedure for the RH side, swap each number on one side with the number at the same position on the opposite side.

      

      Text in Illustration

      *1	Nichrome Wire	*2	Seat Heater Assembly
      *3	Tack Pin	*4	Rear Separate Type Seatback Cover
      *a	Seat Cover Side	*b	Pad Side
      *c	Tack Pin Fastening Position	-	-

2. INSTALL REAR SEPARATE TYPE SEATBACK COVER

   Click here

3. INSTALL SEATBACK COVER WITH PAD

   Click here

4. INSTALL REAR SEAT BELT HOLE COVER LH

   Click here

5. INSTALL SHOULDER BELT ANCHOR COVER

   Click here

6. INSTALL REAR NO. 1 SEAT HEADREST SUPPORT ASSEMBLY

   Click here

7. INSTALL REAR SEAT HEADREST ASSEMBLY

8. INSTALL REAR SEATBACK BOARD SUB-ASSEMBLY LH

   Click here

9. INSTALL REAR SEATBACK COVER

   Click here

10. INSTALL SEAT CUSHION COVER WITH PAD

    Click here

11. CONNECT NO. 1 SEAT 3 POINT TYPE BELT ASSEMBLY LH

    Click here

12. INSTALL REAR NO. 1 SEAT INNER BELT ASSEMBLY LH

    Click here

13. INSTALL REAR SEAT UNDER TRAY COVER LH

    Click here

14. INSTALL REAR SEAT CUSHION COVER RH

    Click here

15. INSTALL REAR UNDER SIDE COVER LH

    Click here

16. INSTALL REAR SEATBACK STAY COVER LH

    Click here

17. INSTALL SEAT BELT ANCHOR COVER CAP

    Click here

18. INSTALL REAR NO. 1 SEAT HINGE SUB-ASSEMBLY RH

    Click here

19. INSTALL REAR NO. 1 SEAT HINGE SUB-ASSEMBLY LH

    Click here

20. INSTALL REAR NO. 2 SEAT PROTECTOR

    Click here

21. INSTALL REAR NO. 2 SEAT LEG SIDE COVER

    Click here

22. INSTALL UPPER SEAT TRACK RAIL COVER RH

    Click here

23. INSTALL UPPER SEAT TRACK RAIL COVER LH

    Click here

24. INSTALL REAR NO. 1 SEAT RECLINING COVER RH

    Click here

25. INSTALL REAR NO. 1 SEAT RECLINING COVER LH

    Click here

26. INSTALL RECLINING ADJUSTER RELEASE HANDLE LH

    Click here

27. INSTALL SEAT ADJUSTER BOLT COVER

    Click here

28. INSTALL REAR NO. 1 SEAT ASSEMBLY

    
    

    1. Install the rear No. 1 seat assembly Click here.