POWER SEAT SWITCH(for 60/40 Split Seat Type 40 Side) INSPECTION

PROCEDURE


  1. INSPECT REAR POWER SEAT SWITCH

    A01WRSVE02
    *1 Rear
    *2 Front
    *3 Component without harness connected: (Rear Power Seat Switch)

    1. Measure the resistance according to the value(s) in the table below.

      Standard Resistance
      Tester Connection Switch Condition Specified Condition
      3 (B) - 4 (H) Front Below 1 Ω
      1 (R) - 2 (E)
      1 (R) - 2 (E) Off
      4 (H) - 5 (E)
      1 (R) - 3 (B) Rear
      4 (H) - 5 (E)

      If the result is not as specified, replace the rear power seat switch.