SEAT BELT WARNING SYSTEM CUSTOMIZE PARAMETERS


  1. CUSTOMIZING FUNCTION WITH GTS

    Tech Tips

    The following items can be customized.

    Note


    • When the customer requests a change in a function, first make sure that the function can be customized.

    • Record the current settings before customizing.

    • When troubleshooting a function, first make sure that the function is set to the default setting.


    1. Customizing with the GTS


      1. Connect the GTS to the DLC3.

      2. Turn the ignition switch to ON.

      3. Turn the GTS on.

      4. Enter the following menus: Utility / Customize / Warning.

      5. Select the setting by referring to the table below.

        Warning
        Display Default Contents Setting Relevant ECU
        Driver Side Seatbelt Warning Buzzer* ON If driver side seat belt is unfastened and the vehicle is driven at approximately 20 km/h (12.5 mph) or more, this system sound the seat belt warning buzzer. ON or OFF Combination meter assembly
        Front Passenger Side Seatbelt Warning Buzzer* ON If front passenger side seat belt is unfastened with the front passenger seat occupied and the vehicle is driven at approximately 20 km/h (12.5 mph) or more, this system sound the seat belt warning buzzer. ON or OFF Combination meter assembly

        • *: w/ Seat Belt Warning Buzzer