REAR SEAT CUSHION HEATER(for 60/40 Split Seat Type 60 Side) INSTALLATION

CAUTION / NOTICE / HINT

CAUTION:

Wear protective gloves. Sharp areas on the parts may injure your hands.

Tech Tips


  • Use the same procedures for LHD and RHD vehicles.

  • The procedures listed below are for LHD vehicles.

PROCEDURE


  1. INSTALL SEAT HEATER ASSEMBLY


    1. Using a tacker, install the seat heater assembly to the rear separate type seat cushion cover with 45 new tack pins in the order shown in the illustration.

      Tech Tips


      • Secure the seat heater assembly so that it does not bend or stretch.


      • Set the seat heater assembly so that the nichrome wire is on the rear separate type seat cushion cover side.


      • The procedure listed below is for the LH side. When performing the procedure for the RH side, swap each number on one side with the number at the same position on the opposite side.

      A01WRKDE03
      Text in Illustration
      *1 Nichrome Wire *2 Rear Separate Type Seat Cushion Cover
      *3 Seat Heater Assembly *4 Tack Pin
      *a Seat Cover Side *b Pad Side
      *c Tack Pin Fastening Position - -

  2. INSTALL REAR SEPARATE TYPE SEAT CUSHION COVER

    Click here

  3. INSTALL SEAT CUSHION COVER WITH PAD

    Click here

  4. CONNECT NO. 1 SEAT 3 POINT TYPE BELT ASSEMBLY LH

    Click here

  5. INSTALL REAR NO. 1 SEAT INNER BELT ASSEMBLY LH

    Click here

  6. INSTALL REAR SEAT UNDER TRAY COVER LH

    Click here

  7. INSTALL REAR SEAT CUSHION COVER RH

    Click here

  8. INSTALL REAR UNDER SIDE COVER LH

    Click here

  9. INSTALL REAR SEATBACK STAY COVER LH

    Click here

  10. INSTALL SEAT BELT ANCHOR COVER CAP

    Click here

  11. INSTALL REAR NO. 1 SEAT HINGE SUB-ASSEMBLY RH

    Click here

  12. INSTALL REAR NO. 1 SEAT HINGE SUB-ASSEMBLY LH

    Click here

  13. INSTALL REAR NO. 2 SEAT PROTECTOR

    Click here

  14. INSTALL REAR NO. 2 SEAT LEG SIDE COVER

    Click here

  15. INSTALL UPPER SEAT TRACK RAIL COVER RH

    Click here

  16. INSTALL UPPER SEAT TRACK RAIL COVER LH

    Click here

  17. INSTALL REAR NO. 1 SEAT RECLINING COVER RH

    Click here

  18. INSTALL REAR NO. 1 SEAT RECLINING COVER LH

    Click here

  19. INSTALL RECLINING ADJUSTER RELEASE HANDLE LH

    Click here

  20. INSTALL SEAT ADJUSTER BOLT COVER

    Click here

  21. INSTALL REAR NO. 1 SEAT ASSEMBLY


    1. Install the rear No. 1 seat assembly Click here.