REAR NO. 1 SEAT ASSEMBLY(for 60/40 Split Seat Type 60 Side) INSPECTION

PROCEDURE


  1. INSPECT REAR SEAT OUTER TRACK ASSEMBLY LH


    1. Check the operation of the rear power seat motor LH.


      1. A01WSL3E01
        Text in Illustration
        *a

        Component without wire harness connected

        (Rear Seat Outer Track Assembly LH))

        Apply battery voltage to the rear power seat motor LH connector, and check that the rear seat outer track assembly LH operates smoothly follows.

        OK
        Condition Switch Condition

        Battery positive (+) → Terminal 1

        Battery negative (-) → Terminal 2

        		 Forward

        Battery positive (+) → Terminal 2

        Battery negative (-) → Terminal 1

        		 Backward

        If the result is not as specified, replace the rear seat outer track assembly LH.