REAR NO. 1 SEAT ASSEMBLY(for 60/40 Split Seat Type 60 Side) DISASSEMBLY

CAUTION / NOTICE / HINT

CAUTION:

Wear protective gloves. Sharp areas on the parts may injure your hands.

Tech Tips


  • Use the same procedures for LHD and RHD vehicles.

  • The procedures listed below are for LHD vehicles.

PROCEDURE


  1. REMOVE SEAT ADJUSTER BOLT COVER

    B001A93

    1. Using a screwdriver, detach the 2 claws and remove the cover.

      Tech Tips

      Tape the screwdriver tip before use.

  2. REMOVE RECLINING ADJUSTER RELEASE HANDLE LH

    B0019I4

    1. Remove the screw and release handle.

  3. REMOVE REAR NO. 1 SEAT RECLINING COVER LH

    B001B0IE01

    1. Remove the 2 screws.

    2. Detach the 3 claws in the order shown in the illustration, and then remove the cover.

  4. REMOVE REAR NO. 1 SEAT RECLINING COVER RH

    B00195H

    1. Remove the 2 screws.

    2. Detach the 4 claws and remove the cover.

  5. REMOVE UPPER SEAT TRACK RAIL COVER LH

    B0018TP

    1. Using a screwdriver, detach the 2 claws and remove the cover.

      Tech Tips

      Tape the screwdriver tip before use.

  6. REMOVE UPPER SEAT TRACK RAIL COVER RH

    B0019GS

    1. Using a screwdriver, detach the 2 claws and remove the cover.

      Tech Tips

      Tape the screwdriver tip before use.

  7. REMOVE NO. 1 SEAT CUSHION COVER

    B0019FZ

    1. Detach the 4 claws and remove the 2 covers.

  8. REMOVE REAR NO. 2 SEAT LEG SIDE COVER


    1. B0018CZ

      Remove the 4 screws and detach the 4 claws.

    2. B0019NV

      Remove the bolt that is securing the fold seat stopper band and remove the seat leg side cover together with the fold seat stopper band.

  9. REMOVE FOLD SEAT STOPPER BAND ASSEMBLY


    1. Remove the fold seat stopper band from the seat leg side cover.

  10. REMOVE REAR SEAT SIDE HINGE FEMALE COVER

    B00187Q

    1. Using a screwdriver, detach the 6 claws and remove the 2 covers.

      Tech Tips

      Tape the screwdriver tip before use.

  11. REMOVE REAR SEAT SIDE HINGE MALE COVER LH

    B00187L

    1. Detach the clip and remove the cover.

  12. REMOVE REAR SEAT SIDE HINGE MALE COVER RH


    1. Detach the clip and remove the cover.

  13. REMOVE REAR NO. 2 SEAT PROTECTOR


    1. B001AQM

      Detach the claw and remove the wire harness connector.

    2. w/ Seat Heater System:

      Detach the claw and remove the wire harness connector.

    3. B001834

      Using a clip remover, remove the clip.

    4. Detach the claw and remove the seat protector from the seat hinge.

    5. Detach the 2 claws, open the protector and remove the wire harness.

  14. REMOVE REAR NO. 1 SEAT HINGE SUB-ASSEMBLY LH


    1. B00196T

      Detach the wire harness clamp.

    2. w/ Seat Heater System:

      Detach the wire harness clamp.

    3. Remove the 2 nuts and hinge.

  15. REMOVE REAR NO. 1 SEAT HINGE SUB-ASSEMBLY RH

    B0019ZN

    1. Remove the 2 nuts and hinge.

  16. REMOVE SEAT BELT ANCHOR COVER CAP


    1. B0019Y8

      Detach the claw and open the cap.

    2. B001AW5

      Remove the screw and anchor cover cap.

  17. REMOVE REAR SEATBACK STAY COVER LH

    B0018DQ

    1. Remove the screw.

    2. Detach the 2 claws and remove the cover.

  18. REMOVE REAR UNDER SIDE COVER LH


    1. B0018VB

      Detach the 10 claws.

    2. B0018VY

      Remove the 5 screws.

    3. Detach the 2 clips and 2 claws, and remove the cover.

  19. REMOVE NO. 1 SEAT CUSHION PLATE


    1. B001838

      Detach the 3 claws and remove the seat cushion plate.

  20. REMOVE REAR POWER SEAT SWITCH


    1. Remove the 2 screws and power seat switch.

  21. REMOVE REAR SEAT CUSHION COVER RH

    B001B08

    1. Remove the 4 screws.

    2. Detach the 2 claws and remove the cover.

  22. REMOVE REAR SEAT UNDER TRAY COVER LH

    B0019Q0

    1. Remove the 2 screws and cover.

  23. REMOVE REAR NO. 1 SEAT INNER BELT ASSEMBLY LH

    Click here

  24. DISCONNECT NO. 1 SEAT 3 POINT TYPE BELT ASSEMBLY LH

    Click here

  25. REMOVE SEAT CUSHION COVER WITH PAD


    1. Detach the side airbag wire harness clamps.

    2. Remove the side airbag wire harness through the hole in the seat cushion.

    3. w/ Seat Heater System:


      1. B001A8D

        Disconnect the 2 seat heater connectors.

      2. B001ADM

        Remove the seatback heater wire harness through the hole in the seat cushion.

    4. Remove the seat cushion cover with pad.

  26. REMOVE REAR SEPARATE TYPE SEAT CUSHION COVER


    1. B0018KIE01
      *1 Fastening Tape

      Detach the 3 pieces of fastening tape.

    2. Remove the hog rings and cover.

  27. REMOVE REAR SEAT CUSHION HEATER ASSEMBLY (w/ Seat Heater System)

    B0018HN

    1. Cut off the tack pins which fasten the rear seat cushion heater assembly to the seat cushion cover, and then remove the rear seat cushion heater assembly from the seat cushion cover.

  28. REMOVE REAR SEATBACK COVER

    B0019TFE01
    *1 Protective Tape

    1. Using a screwdriver, detach the 4 claws and remove the cover.

      Tech Tips

      Tape the screwdriver tip before use.

  29. REMOVE REAR SEATBACK BOARD SUB-ASSEMBLY LH

    B001AG5

    1. Detach the 2 claws on the top of the board.

    2. Pull up the board to detach the 2 claws on the bottom of the board and remove it.

  30. REMOVE REAR SEAT HEADREST ASSEMBLY

  31. REMOVE REAR NO. 1 SEAT HEADREST SUPPORT ASSEMBLY

    B0019D9

    1. Detach the 4 claws and remove the 2 supports.

  32. REMOVE SHOULDER BELT ANCHOR COVER

    B00194OE01
    *1 Protective Tape

    1. Using a screwdriver, detach the 2 claws and remove the cover.

      Tech Tips

      Tape the screwdriver tip before use.

  33. REMOVE REAR SEAT BELT HOLE COVER LH

    B001AD3

    1. Remove the 2 screws.

    2. Detach the 4 claws and remove the cover.

  34. REMOVE SEATBACK COVER WITH PAD


    1. B001AFG

      Remove the hog rings.

    2. B0019ZY

      Remove the cap nut and seatback cover bracket from the seat frame.

    3. Remove the side airbag wire harness through the hole in the seatback.

    4. w/ Seat Heater System:


      1. B001AN3E01
        *1 Cable Tie

        Cut the cable tie and disconnect the seatback heater wire harness.

      2. B00199Z

        Remove the seatback heater wire harness through the hole in the seatback.

    5. B0018OR

      Pull the seat belt into the inside of the seat.

    6. Remove the seatback cover with pad.

  35. REMOVE REAR SEPARATE TYPE SEATBACK COVER


    1. B00187A

      Disconnect the seatback cover bracket from the seatback pad.

    2. Remove the hog rings and rear seatback cover.

  36. REMOVE REAR SEATBACK HEATER ASSEMBLY (w/ Seat Heater System)

    B00194F

    1. Cut off the tack pins which fasten the rear seatback heater assembly to the seatback cover, and then remove the rear seatback heater assembly from the seatback cover.

  37. REMOVE REAR CENTER SEAT HEADREST ASSEMBLY

  38. REMOVE SEATBACK STOPPER PLATE

    B00193N

    1. Using a T40 "TORX" socket, remove the 2 bolts.

    2. Remove the bolt and stopper plate.

    3. Remove the bush from the stopper plate.

  39. REMOVE REAR CENTER SEAT ARMREST ASSEMBLY

    B001AR8

    1. Using a T40 "TORX" socket, remove the 2 bolts and center seat armrest.

  40. REMOVE COOLER CONTROL SWITCH ASSEMBLY (w/ Climate Control Seat System)

    Click here

  41. REMOVE REAR SEAT CENTER ARMREST PANEL SUB-ASSEMBLY (w/o Climate Control Seat System)

  42. REMOVE REAR SEAT CENTER ARMREST BOX ASSEMBLY

  43. REMOVE REAR SEATBACK MOULDING LH


    1. B0019ZV

      Detach the 2 claws and 5 clips.

    2. w/ Climate Control System:


      1. B001APG

        Pull out the seat switch wiring sub-assembly.

    3. B001AEO

      Detach the guide and claw to remove the rear seatback moulding LH.

  44. REMOVE REAR SEATBACK MOULDING RH


    1. B001847

      Detach the claw and guide to remove the rear seatback moulding RH.

  45. REMOVE REAR SEAT CENTER ARMREST DOOR SUB-ASSEMBLY


    1. B001B4J

      Detach the 3 clips.

    2. Remove the 2 nuts and rear seat center armrest door sub-assembly.

  46. REMOVE SEAT SWITCH WIRING SUB-ASSEMBLY (w/ Climate Control Seat System)


    1. B001861

      Remove the clamp.

    2. Remove the seat switch wiring sub-assembly.

  47. REMOVE SEAT CENTER ARMREST BRACKET SUB-ASSEMBLY

  48. REMOVE REAR SEAT CENTER ARMREST CUP HOLDER SUB-ASSEMBLY


    1. Detach the claw and remove the rear seat center armrest cup holder sub-assembly.

  49. REMOVE REAR SEAT RECLINING COVER LH

    B0018N6

    1. Remove the screw.

    2. Detach the claw and remove the cover.

  50. REMOVE REAR NO. 2 SEAT RECLINING COVER LH

    B001912

    1. Remove the screw.

    2. Detach the clamp and remove the cover.

  51. REMOVE REAR NO. 1 SEAT RECLINING COVER RH

    B001AIT

    1. Remove the screw.

    2. Detach the claw and remove the cover.

  52. REMOVE REAR SEATBACK HINGE COVER LH

    B00199U

    1. Remove the screw.

    2. Detach the claw and remove the cover.

  53. REMOVE REAR LOWER SEATBACK COVER SUB-ASSEMBLY LH

    B001951

    1. Remove the 4 screws.

    2. Detach the 4 claws and remove the cover.

  54. REMOVE REAR SEAT SHOULDER BELT HOLE COVER LH

    Click here

  55. REMOVE NO. 1 SEAT 3 POINT TYPE BELT ASSEMBLY LH

    Click here

  56. REMOVE RECLINING ADJUSTING CABLE ASSEMBLY LH

    B0019YT

    1. Detach the 2 cable clamps and disconnect the cable.

    2. Detach the clamp and remove the adjusting cable.

  57. REMOVE NO. 2 FOLD SEAT LOCK CONTROL CABLE ASSEMBLY

    B00184E

    1. Detach the 2 cable clamps and disconnect the cable.

    2. Detach the clamp and remove the lock control cable.

  58. REMOVE REAR SEATBACK FRAME SUB-ASSEMBLY LH

    B0018SF

    1. LH Side:

      Using a T40 "TORX" socket, remove the 2 bolts.

    2. RH Side:

      Using a T55 "TORX" socket, remove the 2 bolts.

    3. Remove the seatback frame.

    4. B00185N

      Remove the lower seatback cover.

  59. REMOVE SEAT CLIMATE CONTROL BLOWER LH (w/ Climate Control Seat System)


    1. B00197G

      Detach the connector.

    2. Remove the screw and detach the 2 guides to remove the seat climate control blower LH.

  60. REMOVE REAR NO. 1 SEAT LOCK CABLE ASSEMBLY


    1. B001A9P

      Remove the 2 nuts and lower seat track bracket.

    2. B00187U

      Cut the cable tie and disconnect the cable.

    3. Detach the 3 cable clamps and disconnect the 3 cables.

    4. Detach the clamp and remove the seat lock cable.

  61. REMOVE REAR SEAT CUSHION HOLDER BRACKET LH (w/ Seat Heater System)

    B0018YJ

    1. Disconnect the seat wire connector.

    2. Remove the 2 screws and holder bracket.

  62. REMOVE SEAT HEATER CONTROL SUB-ASSEMBLY LH (w/ Seat Heater System)

    B0019TX

    1. Detach the 2 claws and remove the seat heater control.

  63. REMOVE REAR SEAT INNER BELT ASSEMBLY

    Click here

  64. REMOVE NO. 1 SEAT LEG ASSEMBLY LH


    1. B001AYU

      Using T40 "TORX" socket, remove the 2 bolts and seat leg assembly.

  65. REMOVE REAR SEAT CUSHION FRAME SUB-ASSEMBLY LH

    B0019HI

    1. Using a T40 "TORX" socket, remove the bolt.

    2. Remove the 5 nuts and seat cushion frame.

  66. REMOVE SEAT CLIMATE CONTROL BLOWER LH (w/ Climate Control Seat System)


    1. B001A64

      Detach the guide and remove the 6 screws and seat climate control blower LH.