REAR NO. 2 SEAT ASSEMBLY(w/ Automatic Folding-up Function) DISASSEMBLY

CAUTION / NOTICE / HINT

CAUTION:

Wear protective gloves. Sharp areas on the parts may injure your hands.

Tech Tips


  • Use the same procedures for the LH side and RH side.

  • The procedures listed below are for the LH side.

PROCEDURE


  1. REMOVE POWER SEAT MOTOR ASSEMBLY

    A01WWIX

    1. Disconnect the 2 connectors.

    2. Using a 5 mm hexagon socket wrench, remove the 4 bolts and motor.

  2. REMOVE NO. 2 SEAT CUSHION COVER

    A01WVOJ

    1. Remove the screw and detach the 2 claws to remove the cover.

  3. REMOVE FOLD SEAT CONTROL ECU

    A01WW3E

    1. Disconnect the 2 connectors.

    2. Detach the 2 claws and remove the ECU.

  4. REMOVE REAR NO. 2 SEAT LEG BRACKET REAR LH

    A01WQDC

    1. Detach the 4 clamps.

    2. A01WU0Z

      Remove the bolt, nut and bracket.

  5. REMOVE SEAT ADJUSTER BOLT COVER

    A01WTW3

    1. Using a screwdriver, detach the 2 claws and remove the cover.

      Tech Tips

      Tape the screwdriver tip before use.

  6. REMOVE NO. 2 RECLINING ADJUSTER RELEASE HANDLE LH

    A01WP8K

    1. Remove the screw and release handle.

  7. REMOVE REAR SEAT REAR BRACKET COVER REAR

    A01WVOI

    1. Detach the 2 claws and remove the cover.

  8. REMOVE REAR NO. 3 SEAT LEG COVER LH


    1. A01WUF2

      Using a screwdriver, remove the spring of the seat stay ball joint.

    2. Disconnect the seat stay.

    3. A01WU0V

      Remove the 2 screws.

    4. Detach the 2 claws and remove the seat leg cover.

  9. REMOVE NO. 2 SEAT LEG COVER NO. 2


    1. A01WWMG

      Remove the screw and cover.

  10. REMOVE RECLINING ADJUSTER COVER LH

    A01WSIOE01

    1. Remove the screw.

    2. Detach the 3 claws in the order shown in the illustration, and then remove the cover.

  11. REMOVE RECLINING ADJUSTER COVER RH

    A01WR4AE01

    1. Remove the screw.

    2. Detach the 5 claws in the order shown in the illustration, and then remove the cover.

  12. REMOVE REAR SEAT INNER RECLINING COVER LH

    A01WWGU

    1. Detach the 2 claws and remove the cover.

  13. REMOVE 3RD SEAT LINK SUB-ASSEMBLY LH

    A01WUPW

    1. Remove the bolt, nut and seat link.

  14. REMOVE 3RD SEAT CUSHION LOCK COVER

    A01WWOB

    1. Detach the 4 claws and remove the 2 covers.

  15. REMOVE REAR SEAT CUSHION UNDER COVER LH


    1. A01WQ6R

      Detach the 16 claws.

    2. A01WSAQ

      Remove the 7 screws and cover.

  16. REMOVE NO. 3 SEAT FRONT BRACKET COVER LH

    A01WVMJ

    1. Detach the 4 claws and remove the cover.

  17. REMOVE NO. 3 SEAT LEG COVER NO. 2

    A01WW85

    1. Remove the 2 screws.

    2. Detach the 4 claws and remove the cover.

  18. REMOVE REAR SEAT LOCK COVER LH

    A01WTIZ

    1. Remove the 2 screws.

    2. Detach the 2 clamps and remove the 2 covers.

  19. REMOVE REAR SEAT INNER BELT SUB-ASSEMBLY (for LH Side)

    Click here

  20. REMOVE REAR SEAT OUTER BELT SUB-ASSEMBLY (for RH Side)

    Click here

  21. REMOVE REAR NO. 2 SEAT INNER BELT SUB-ASSEMBLY

    Click here

  22. REMOVE REAR SEAT CUSHION CARPET

    A01WVED

    1. Cut off the tack pins which fasten the seat cushion carpet to the seat cushion pad, and then remove the seat cushion carpet from the seat cushion pad.

  23. REMOVE SEAT CUSHION COVER WITH PAD

  24. REMOVE NO. 3 SEAT CUSHION PAD LH

  25. REMOVE NO. 3 SEAT CUSHION COVER SUB-ASSEMBLY LH


    1. A01WQVX

      Remove the E-ring and detach the clamp.

    2. Detach the cable clamp and disconnect the cable.

    3. A01WTY3

      Detach the 4 clamps.

    4. Disconnect the 3 connectors.

    5. Remove the 2 cable ties.

    6. A01WVPX

      Remove the hog rings and seat cushion cover.

  26. REMOVE NO. 2 SEAT STAY SUB-ASSEMBLY

    A01WRQU

    1. Remove the bolt and seat stay.

  27. REMOVE NO. 3 FOLD SEAT LOCK CONTROL CABLE ASSEMBLY


    1. A01WTCU

      Detach the 2 cable clamps and disconnect the 2 cables.

    2. A01WR7O

      Detach the 2 clamps and remove the 2 bolts and control cable.

  28. REMOVE REAR SEAT LOCK CONTROL LEVER SUB-ASSEMBLY LH

    A01WUV9

    1. Remove the 2 bolts and lever.

  29. REMOVE REAR NO. 2 SEATBACK CUSHION

    A01WSFH

    1. Remove the screw and seatback cushion.

  30. REMOVE REAR LOWER SEATBACK LOCK BEZEL

    A01WU87

    1. Detach the 3 claws and clip, and remove the seatback lock bezel.

  31. REMOVE REAR SEAT HINGE PAWL GUIDE

    A01WTMQ

    1. Detach the 5 claws and remove the guide.

  32. REMOVE REAR SEAT HINGE PAWL GUIDE

    A01WSLS

    1. Remove the 3 screws and guide.

  33. REMOVE SEATBACK COVER WITH PAD

    A01WSQI

    1. Open the fastener.

    2. A01WU3X

      Detach the 2 hooks.

    3. A01WTEH

      Pull out the center headrest storage bag.

    4. A01WQW9

      Remove the rear seat protector.

    5. A01WWP0

      Detach the cable clamp and disconnect the cable.

    6. Detach the clamp.

    7. A01WPX6E03
      *1 Protective Tape

      for LH Side:


      1. While releasing the lock inside the headrest support with a screwdriver, remove the headrest.

        Tech Tips

        Tape the screwdriver tip before use.

      2. A01WPLM

        Detach the 8 claws and remove the 4 headrest supports.

    8. for RH Side:


      1. A01WQ5CE01
        *1 Protective Tape

        While releasing the lock inside the headrest support with a screwdriver, remove the headrest.

        Tech Tips

        Tape the screwdriver tip before use.

      2. A01WQEZ

        Detach the 4 claws and remove the 2 headrest supports.

    9. A01WS5M

      Remove the hog ring and seatback cover with pad.

  34. REMOVE REAR SEAT HEADREST HANDLE

    A01WV7U

    1. Remove the snap ring and headrest handle.

  35. REMOVE NO. 3 SEATBACK COVER SUB-ASSEMBLY LH

    A01WPXA

    1. Remove the hog rings and seatback cover.

  36. REMOVE REAR INNER SEAT RECLINING COVER LH

    A01WVAC

    1. Remove the screw.

    2. Detach the claw and remove the cover.

  37. REMOVE REAR INNER SEAT RECLINING COVER RH


    1. Remove the screw.

    2. Detach the claw and remove the cover.

  38. REMOVE REAR SEAT LOCK CONTROL CABLE

    A01WS7P

    1. Detach the cable clamp and disconnect the cable.

    2. Detach the 2 clamps and remove the lock control cable.

  39. REMOVE REAR NO. 2 SEAT WIRE LH

    A01WWZD

    1. Disconnect the 5 connectors and detach the 4 clamps, and then remove the rear No. 2 seat wire LH.

  40. REMOVE REAR SEATBACK LOCK STRIKER ASSEMBLY LH

    A01WTLX

    1. Remove the 2 nuts and lock striker.

  41. REMOVE REAR NO. 2 SEATBACK COVER LH


    1. Detach the 3 claws and remove the cover.

  42. REMOVE REAR SEATBACK LOCK STRIKER COVER LH


    1. Detach the 2 clamps and remove the cover.

  43. REMOVE NO. 2 SEAT RECLINING RELEASE HANDLE SUB-ASSEMBLY

    A01WV2E

    1. Remove the bolt and release handle.