AIRBAG CUT-OFF SWITCH INSTALLATION

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for RHD and LHD vehicles.

  • The procedure listed below is for LHD vehicles.

PROCEDURE


  1. INSTALL AIRBAG CUT-OFF SWITCH


    1. B0019WK

      Attach the 2 claws to install the airbag cut-off switch.

  2. INSTALL INSTRUMENT SIDE PANEL RH

    Click here

  3. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

  4. INSTALL UPPER RADIATOR SUPPORT SEAL

    Click here

  5. CHECK SRS WARNING LIGHT


    1. Check the SRS warning light Click here.