AIRBAG CUT-OFF SWITCH INSPECTION

PROCEDURE


  1. INSPECT AIRBAG CUT-OFF SWITCH


    1. A01WWIWE11
      Text in Illustration
      *a

      Component without harness connected.

      (Airbag Cut-off Switch)

      Measure the resistance according to the value(s) in the table below.

      Standard Resistance
      Tester Connection Switch Condition Specified Condition
      1 (MSW-) - 2 (MSW+) Off 90 to 110 Ω
      1 (MSW-) - 2 (MSW+) On 360 to 440 Ω

      If the result is not as specified, replace the airbag cut-off switch.