CURTAIN SHIELD AIRBAG ASSEMBLY INSTALLATION

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for the RH and LH sides.

  • The procedure listed below is for the LH side.

PROCEDURE


  1. INSTALL CURTAIN SHIELD AIRBAG ASSEMBLY


    1. B001AKZ

      Install the curtain shield airbag with the 13 bolts.

      Torque:
      12 N*m  { 122 kgf*cm, 9 ft.*lbf }

      Note

      Do not twist the curtain shield airbag when installing it.

    2. B0018DL

      After installing the bolts, put the curtain shield airbag onto the bracket and close the lock fastener.

    3. Connect the connector.

      Note

      When handling the airbag connector, take care not to damage the airbag wire harness.

  2. INSTALL ROOF HEADLINING ASSEMBLY


    1. Install the roof headlining assembly Click here.

  3. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

  4. INSTALL UPPER RADIATOR SUPPORT SEAL

    Click here

  5. CHECK SRS WARNING LIGHT


    1. Check the SRS warning light Click here.