CURTAIN SHIELD AIRBAG ASSEMBLY REMOVAL

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for the RH and LH sides.

  • The procedure listed below is for the LH side.

PROCEDURE


  1. OPEN BACK DOOR

    Click here

  2. REMOVE UPPER RADIATOR SUPPORT SEAL

    Click here

  3. PRECAUTION

    CAUTION:

    Be sure to read Precaution thoroughly before servicing Click here.

    Note

    After turning the engine switch off, waiting time may be required before disconnecting the cable from the negative (-) battery terminal. Therefore, make sure to read the disconnecting the cable from the negative (-) battery terminal notices before proceeding with work Click here.

  4. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

    CAUTION:

    Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to disable the SRS system.

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

  5. REMOVE ROOF HEADLINING ASSEMBLY


    1. Remove the roof headlining assembly Click here.

  6. REMOVE CURTAIN SHIELD AIRBAG ASSEMBLY


    1. Disconnect the connector.

      Note

      When handling the airbag connector, take care not to damage the airbag wire harness.

    2. B001AKZ

      Remove the 13 bolts and curtain shield airbag.