CURTAIN SHIELD AIRBAG ASSEMBLY ON-VEHICLE INSPECTION

PROCEDURE

1. CHECK CURTAIN SHIELD AIRBAG ASSEMBLY (VEHICLE NOT INVOLVED IN COLLISION)

   
   

   1. Perform a diagnostic system check Click here.

   2. With the curtain shield airbag installed on the vehicle, perform a visual check. If any of the defects mentioned below are present, replace the curtain shield airbag with a new one:

      Cuts, minute cracks or marked discoloration on the curtain shield airbag.

2. CHECK CURTAIN SHIELD AIRBAG ASSEMBLY (VEHICLE INVOLVED IN COLLISION AND AIRBAG HAS NOT DEPLOYED)

   
   

   1. Perform a diagnostic system check Click here.

   2. With the curtain shield airbag removed from the vehicle, perform a visual check. If there are any defects as mentioned below, replace the curtain shield airbag with a new one:

      
      

      • Cuts, minute cracks or marked discoloration on the curtain shield airbag.

      • Cracks or other damage to the connectors.

      Note

      For removal and installation procedures of the curtain shield airbag, be sure to follow the correct procedure.