AIRBAG SYSTEM CHECK MODE PROCEDURE

Note

Enter "Signal Check" from the "DTC Check" screen displayed on the intelligent tester to clear the output DTCs (both present and past).

Tech Tips


  • DTCs can be stored more sensitively in check mode than in normal diagnosis mode.

  • Perform the check mode inspection when a malfunction in each squib circuit is suspected even after the normal system code is output through normal diagnosis mode inspection.


  1. CHECK MODE PROCEDURE (for Using an Intelligent Tester)


    1. Turn the engine switch off.

    2. Connect the intelligent tester to the DLC3.

    3. Turn the engine switch on (IG).

    4. Turn the intelligent tester on.

    5. Enter the following menus: Body / SRS Airbag / Utility / Signal Check*.

      Tech Tips

      *: Follow the directions on the tester screen.