INNER REAR VIEW MIRROR REMOVAL

PROCEDURE


  1. REMOVE INNER REAR VIEW MIRROR STAY HOLDER COVER (w/ Automatic High Beam System)


    1. A01WPPE

      Detach the 2 claws and slide the inner rear view mirror stay holder cover in the direction indicated by the arrow shown in the illustration.

    2. A01WPNI

      Detach the 2 claws and remove the inner rear view mirror stay holder cover.

  2. REMOVE NO. 2 FORWARD RECOGNITION COVER (w/ Pre-crash Safety System)

    Click here

  3. REMOVE NO. 1 FORWARD RECOGNITION COVER (w/ Pre-crash Safety System)

    Click here

  4. REMOVE INNER REAR VIEW MIRROR ASSEMBLY (w/ Automatic High Beam System)


    1. A01WSI9

      Disconnect the connector.

    2. Using a T20 "TORX" socket wrench, remove the screw and inner rear view mirror assembly.

  5. REMOVE INNER REAR VIEW MIRROR ASSEMBLY (w/ Pre-crash Safety System)


    1. A01WT3V

      Disconnect the connector.

    2. Detach the clamp.

    3. A01WW8P

      Using a T20 "TORX" socket wrench, remove the screw and inner rear view mirror assembly.