TRIP SWITCH INSTALLATION

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for RHD and LHD vehicles.

  • The procedure listed below is for LHD vehicles.

PROCEDURE


  1. INSTALL LIGHT CONTROL RHEOSTAT (TRIP SWITCH)

    A01WSIM

    1. Attach the 2 claws to install the light control rheostat (trip switch).

  2. INSTALL NO. 2 INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY

    Click here

  3. INSTALL NO. 1 SWITCH HOLE BASE

    Click here

  4. INSTALL INSTRUMENT SIDE PANEL LH

    Click here

  5. INSTALL LOWER INSTRUMENT PANEL PAD SUB-ASSEMBLY LH

    Click here

  6. ENABLE AUTOAWAY/RETURN FUNCTION


    1. Restore the autoaway/return function setting to the previous condition by changing the customize parameter Click here.