HEADUP DISPLAY INSTALLATION

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for RHD and LHD vehicles.

  • The procedure listed below is for LHD vehicles.

  • A bolt without a torque specification is shown in the standard bolt chart Click here.

PROCEDURE


  1. INSTALL METER MIRROR SUB-ASSEMBLY (HEADUP DISPLAY)

    B0019M8

    1. Connect the connector.

    2. B001AI3

      Install the meter mirror sub-assembly (headup display) with the 3 bolts.

    3. Install the cushion.

  2. INSTALL NO. 1 HEATER TO REGISTER DUCT SUB-ASSEMBLY

    Click here

  3. INSTALL CENTER HEATER TO REGISTER DUCT

    Click here

  4. INSTALL INSTRUMENT PANEL SAFETY PAD ASSEMBLY

    Click here

  5. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

  6. CHARGE REFRIGERANT (w/ Cool Box)

    Click here

  7. WARM UP ENGINE (w/ Cool Box)

    Click here

  8. CHECK FOR REFRIGERANT GAS LEAK (w/ Cool Box)

    Click here

  9. ENABLE AUTOAWAY/RETURN FUNCTION


    1. Restore the autoaway/return function setting to the previous condition by changing the customize parameter Click here.

  10. CHECK SRS WARNING LIGHT

    Click here

  11. INSTALL UPPER RADIATOR SUPPORT SEAL

    Click here