REAR DOOR COURTESY SWITCH INSPECTION

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedures for the RH and LH side.

  • The procedures listed below are for the LH side.

PROCEDURE


  1. INSPECT REAR DOOR COURTESY LIGHT SWITCH ASSEMBLY

    A01WP97E01
    Text in Illustration
    *a

    Component without harness connected

    (Rear Door Courtesy Light Switch Assembly)

    1. Measure the resistance according to the value(s) in the table below.

      Standard Resistance
      Tester Connection Switch Condition Specified Condition
      Terminal 1 - Switch body Pin not pushed Below 1 Ω
      Pin pushed 10 kΩ or higher

      If the result is not as specified, replace the rear door courtesy light switch assembly.