SCUFF PLATE LIGHT INSPECTION

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedures for the RH and LH side.

  • The procedures listed below are for the LH side.

PROCEDURE


  1. INSPECT FRONT DOOR SCUFF PLATE LH (SCUFF PLATE LIGHT)

    A01WVP1E01
    Text in Illustration
    *a

    Component without harness connected

    (Front Door Scuff Plate LH (Scuff Plate Light))

    1. Apply battery voltage to the connector and check the light illumination condition.

      OK
      Measurement Condition Specified Condition

      Battery positive (+) → 1 (B)

      Battery negative(-) → 2 (E)

      		 Light illuminates

      If the result is not as specified, replace the front door scuff plate LH (scuff plate light).