DOOR COURTESY LIGHT(for Front) INSPECTION

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedures for the RH and LH side.

  • The procedures listed below are for the LH side.

PROCEDURE


  1. INSPECT COURTESY LIGHT ASSEMBLY

    A01WSH5E01
    Text in Illustration
    *a

    Component without harness connected

    (Courtesy Light Assembly)

    1. Apply battery voltage to the connector and check the light illumination condition.

      OK
      Measurement Condition Specified Condition

      Battery positive (+) → 1 (B)

      Battery negative (-) → 2 (SW)

      		 Illuminates

      If the result is not as specified, replace the courtesy light assembly.