ROOM LIGHT(for Rear) INSPECTION

PROCEDURE


  1. INSPECT NO. 3 ROOM LIGHT ASSEMBLY


    1. Inspect the room light.


      1. A01WQGHE01
        Text in Illustration
        *a

        Component without harness connected

        (No. 3 Room Light Assembly)

        Apply battery voltage to the connector and check the light illumination condition.

        OK
        Measurement Condition Condition Specified Condition

        Battery positive (+) → 2 (DL)

        Battery negative (-) → 4 (DB)

        		 Room light switch on Room light illuminates

        If the result is not as specified, replace the No. 3 room light assembly.

    2. Inspect the room light (for Door-linked).


      1. A01WW8GE01
        Text in Illustration
        *a

        Component without harness connected

        (No. 3 Room Light Assembly)

        Apply battery voltage to the connector and check the light illumination condition.

        OK
        Measurement Condition Condition Specified Condition

        Battery positive (+) → 4 (DB)

        Battery negative (-) → 3 (L)

        		 Room light switch on Room light illuminates

        If the result is not as specified, replace the No. 3 room light assembly.