LIGHTING SYSTEM DATA LIST / ACTIVE TEST


  1. DATA LIST

    Note

    In the table below, the values listed under "Normal Condition" are reference values. Do not depend solely on these reference values when deciding whether a part is faulty or not.

    Tech Tips

    Using the GTS to read the Data List allows the values or states of switches, sensors, actuators and other items to be read without removing any parts. This non-intrusive inspection can be very useful because intermittent conditions or signals may be discovered before parts or wiring is disturbed. Reading the Data List information early in troubleshooting is one way to save diagnostic time.


    1. Connect the GTS to the DLC3.

    2. Turn the engine switch on (IG).

    3. Turn the GTS on.

    4. Enter the following menus: Body Electrical / Main Body / (desired system) / Data List.

    5. Read the Data List according to the display on the GTS.

      Main Body
      Tester Display Measurement Item/Range Normal Condition Diagnostic Note
      ACC SW

      Engine switch on (ACC) signal/

      ON or OFF

      ON: Engine switch on (ACC)

      OFF: Engine switch off

      		 "ON" is also displayed for this item when the engine switch is on (IG).
      IG SW

      Engine switch on (IG) signal/

      ON or OFF

      ON: Engine switch on (IG)

      OFF: Engine switch off

      		 "OFF" is also displayed for this item when the engine switch is on (ACC).
      RR Door Courtesy SW

      Rear door courtesy light switch RH signal/

      ON or OFF

      ON: Rear door courtesy light switch RH on

      OFF: Rear door courtesy light switch RH off

      		 -
      RL Door Courtesy SW

      Rear door courtesy light switch LH signal/

      ON or OFF

      ON: Rear door courtesy light switch LH on

      OFF: Rear door courtesy light switch LH off

      		 -
      Back Door Courtesy SW

      Back door courtesy switch signal/ ON or OFF

      ON or OFF

      ON: Back door courtesy switch on

      OFF: Back door courtesy switch off

      		 -
      FR Door Lock Pos

      Front door unlock detection switch RH signal/

      UNLOCK or LOCK

      UNLOCK: Front door RH unlocked

      LOCK: Front door RH locked

      		 -
      FR Door Courtesy SW

      Front door courtesy light switch RH signal/

      ON or OFF

      ON: Front door courtesy light switch RH on

      OFF: Front door courtesy light switch RH off

      		 -
      FL Door Lock Pos

      Front door unlock detection switch LH signal/

      UNLOCK or LOCK

      UNLOCK: Front door LH unlocked

      LOCK: Front door LH locked

      		 -
      FL Door Courtesy SW

      Front door courtesy light switch LH signal/

      ON or OFF

      ON: Front door courtesy light switch LH on

      OFF: Front door courtesy light switch LH off

      		 -
      RR-Door Lock Pos SW

      Rear door RH unlock detection switch signal/

      ON or OFF

      ON: Rear door RH unlocked

      OFF: Rear door RH locked

      		 -
      RL-Door Lock Pos SW

      Rear door LH unlock detection switch signal/

      ON or OFF

      ON: Rear door RH unlocked

      OFF: Rear door RH locked

      		 -
      Back Door*
      Tester Display Measurement Item/Range Normal Condition Diagnostic Note
      Courtesy SW

      Back door courtesy switch signal/

      ON or OFF

      ON: Back door courtesy switch on

      OFF: Back door courtesy switch off

      		 -

      *: w/ Power Back Door

  2. ACTIVE TEST

    Tech Tips

    Using the GTS to perform Active Tests allows relays, VSVs, actuators and other items to be operated without removing any parts. This non-intrusive functional inspection can be very useful because intermittent operation may be discovered before parts or wiring is disturbed. Performing Active Tests early in troubleshooting is one way to save diagnostic time. Data List information can be displayed while performing Active Tests.


    1. Connect the GTS to the DLC3.

    2. Turn the engine switch on (IG).

    3. Turn the GTS on.

    4. Enter the following menus: Body Electrical / Main Body / (desired system) / Active Test.

    5. Perform the Active Test according to the display on the GTS.

      Main Body
      Tester Display Test Part Control Range Diagnostic Note
      Illuminated Entry System Turns on the lights that are controlled by the illuminated entry system ON or OFF Perform the Active Test with the door switch in the map light assembly turned on.
      Fr Foot Light Turns on the foot lights ON or OFF Check the operation with the vehicle stopped, all doors locked and the engine switch off.
      Relay for Interior Light Auto Cut Function DOME CUT relay ON or OFF Check the operation with the interior illumination on.
      Interior Illumination Light1 Turns on the door illumination ON or OFF -
      Smart Access
      Tester Display Test Part Control Range Diagnostic Note
      Power/Engine SW Light Engine switch illumination ON or OFF Approximately 20 seconds after turning the engine switch off with all the doors closed, check the operation once the engine switch lettering illumination turns off.
      Body No. 4
      Tester Display Test Part Control Range Diagnostic Note
      Rear Step Light Turns on the step lights ON or OFF -
      Inside Handle Illumination Light Turns on the inside handle illumination lights ON or OFF -
      Mirror
      Tester Display Test Part Control Range Diagnostic Note
      Fr Foot Light Turns on the outer mirror foot lights ON or OFF -