ENGINE HOOD COURTESY SWITCH INSTALLATION

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedures for LHD and RHD vehicles.

  • The procedures listed below are for LHD vehicles.

PROCEDURE


  1. INSTALL HOOD LOCK ASSEMBLY


    1. B00193I

      Apply MP grease to the sliding areas of the lock.

    2. B0018GA

      Connect the hood lock control cable.

    3. B00190A

      Connect the connector.

    4. Install the hood lock with the 2 bolts and nut.

      Torque:
      5.5 N*m  { 56 kgf*cm, 49 in.*lbf }

  2. INSTALL HOOD LOCK CONTROL CABLE COVER


    1. B0018L1

      Attach the claw to install the cover.

    2. Install the 3 screws.

  3. INSTALL NO. 1 RADIATOR MOUNTING LOWER BRACKET


    1. B001A0M

      Install the No. 1 radiator mounting lower bracket with the bolt.

      Torque:
      8.5 N*m  { 87 kgf*cm, 75 in.*lbf }

  4. INSTALL FRONT BUMPER COVER

    Install the front bumper cover Click here.