ELECTRICAL KEY OSCILLATOR(for Rear Floor) REMOVAL

PROCEDURE

1. REMOVE UPPER RADIATOR SUPPORT SEAL

   Click here

2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

   CAUTION:

   Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to disable the SRS system.

   Note

   When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

3. REMOVE REAR NO. 1 SEAT ASSEMBLY LH

   
   

   1. Remove the rear No. 1 seat assembly LH Click here.

4. REMOVE REAR NO. 1 SEAT ASSEMBLY RH

   
   

   1. Remove the rear No. 1 seat assembly RH Click here.

5. REMOVE FRONT QUARTER TRIM PANEL ASSEMBLY LH

   
   

   1. Remove the front quarter trim panel assembly LH Click here.

6. REMOVE FRONT QUARTER TRIM PANEL ASSEMBLY RH

   
   

   1. Remove the front quarter trim panel assembly RH Click here.

7. REMOVE REAR NO. 1 SEAT PROTECTOR

   Click here

8. REMOVE REAR NO. 2 SEAT PROTECTOR

   Click here

9. REMOVE NO. 2 INDOOR ELECTRICAL KEY ANTENNA ASSEMBLY

   
   

   1. Fold back the front floor carpet assembly.

   2. 

      Detach the 2 claws and remove the electrical key antenna.

   3. Disconnect the connector.