PERSONAL LIGHT(for Rear) INSPECTION

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for RHD and LHD vehicles.

  • The procedure listed below is for LHD vehicles.

  • Use the same procedure for the RH and LH sides.

  • The procedure listed below is for the LH side.

PROCEDURE


  1. INSPECT NO. 1 INTERIOR ILLUMINATION LIGHT ASSEMBLY

    A01WTZ0E01
    Text in Illustration
    *a

    Component without harness connected

    (No. 1 Interior Illumination Light Assembly)

    1. Apply battery voltage to the connector and check the light illumination condition.

      OK
      Measurement Condition Specified Condition

      Battery positive (+) → 2 (B)

      Battery negative(-) → 1 (L)

      		 Illuminates

      If the result is not as specified, replace the No. 1 interior illumination light assembly.