THEFT DETERRENT SYSTEM DATA LIST / ACTIVE TEST


  1. DATA LIST

    Tech Tips

    Using the GTS to read the Data List allows the values or states of switches, sensors, actuators and other items to be read without removing any parts. This non-intrusive inspection can be very useful because intermittent conditions or signals may be discovered before parts or wiring is disturbed. Reading the Data List information early in troubleshooting is one way to save diagnostic time.

    Note

    In the table below, the values listed under "Normal Condition" are reference values. Do not depend solely on these reference values when deciding whether a part is faulty or not.


    1. Connect the GTS to the DLC3.

    2. Turn the engine switch on (IG).

    3. Turn the GTS on.

    4. Enter the following menus: Body Electrical / Main Body / Data List.

    5. According to the display on the GTS, read the Data List.

      Main Body
      Tester Display Measurement Item/Range Normal Condition Diagnostic Note
      ACC SW Engine switch / ON or OFF

      ON: Engine switch on (ACC)

      OFF: Engine switch off

      		 "ON" is also displayed for this item when the engine switch is on (IG).
      IG SW Engine switch / ON or OFF

      ON: Engine switch on (IG)

      OFF: Engine switch off

      		 "OFF" is also displayed for this item when the engine switch is on (ACC).
      RR Door Courtesy SW Rear door courtesy light switch RH / ON or OFF

      ON: Rear door RH open

      OFF: Rear door RH closed

      		 -
      RL Door Courtesy SW Rear door courtesy light switch LH / ON or OFF

      ON: Rear door LH open

      OFF: Rear door LH closed

      		 -
      Back Door Courtesy SW Back door courtesy light switch / ON or OFF

      ON: Back door open

      OFF: Back door closed

      		 -
      FR Door Lock Pos Front door RH unlock detection switch / LOCK or UNLOCK

      LOCK: Front door RH locked

      UNLOCK: Front door RH unlocked

      		 -
      FR Door Courtesy SW Front door courtesy light switch RH / ON or OFF

      ON: Front door RH closed

      OFF: Front door RH open

      		 -
      FL Door Lock Pos Front door LH unlock detection switch / LOCK or UNLOCK

      LOCK: Front door LH locked

      UNLOCK: Front door LH unlocked

      		 -
      FL Door Courtesy SW Front door courtesy light switch LH / ON or OFF

      ON: Front door LH closed

      OFF: Front door LH open

      		 -
      Hood Courtesy SW Engine hood courtesy switch / ON or OFF

      ON: Engine hood closed

      OFF: Engine hood open

      		 -
      RR-Door Lock Pos SW Rear door RH unlock detection switch / ON or OFF

      ON: Rear door RH or LH unlocked

      OFF: Rear door RH and LH locked

      		 -
      RL-Door Lock Pos SW Rear door LH unlock detection switch / ON or OFF

      ON: Rear door LH or RH unlocked

      OFF: Rear door LH and RH locked

      		 -
      Intrusion Sens OFF SW*1 Intrusion sensor cancel switch / ON or OFF

      ON: Intrusion sensor cancel switch on

      OFF: Intrusion sensor cancel switch off

      		 -
      Glass Break Sensor Detection*5 Glass breakage sensor detection / ON or OFF

      ON: Glass breakage sensor detected

      OFF: Glass breakage sensor not detected

      		 -
      Intrusion Sensor*1 Status of the intrusion and tilt sensor detection / ON or OFF

      ON: One of the conditons below is met


      • Moving object detected by sensor

      • Vehicle tilt detected by sensor

      OFF: Both of the conditions below are met


      • No moving object detected by sensor

      • Vehicle tilt not detected by sensor

      		 -
      Intrusion Sen Conn*1 Intrusion and tilt sensor connecting / ON or OFF

      ON: Intrusion and tilt sensor connected

      OFF: Intrusion and tilt sensor not connected

      		 -
      Sealed Glas Brak Sen*5 Glass breakage sensor connecting / With or Without

      With: Glass breakage sensor connected

      Without: Glass breakage sensor not connected

      		 -
      Intrusion Sensor Sound Detect*1, *3, *7 Sound detection status of the intrusion sensor / ON or OFF

      ON: Sound detected

      OFF: Sound not detected

      		 Only displays "ON" on the Data List once. When checking again, disconnect and reconnect the GTS.
      Panic Function*6 This function operates the theft deterrent system when the panic switch is pressed and held for 0.8 seconds / ON or OFF Customized value displayed -
      Window Open Warning This function is used to enable or disable the window open warning / ON or OFF Customized value displayed -
      Slide Roof Open Warning*2 This function is used to enable or disable the sliding roof open warning / ON or OFF Customized value displayed -
      Intrusion Win Opened*1 Setting of the customized item "Intrusion Win Opened" / ON or OFF Customized value displayed -
      Security control with mechanism key*4 Setting of the customized item "Security control with mechanism key"/ ON or OFF Customized value displayed -
      Intrusion Sensor Sound Detection Function*1, *3 Setting of the customized item "Intrusion Sensor Sound Detection Function" / ON or OFF Customized value displayed -
      Intrusion Sensor Sensitivity Level*1, *3 Setting of the customized item "Intrusion Sensor Sensitivity Level" /Low or Normal Customized value displayed -
      The Number of DTC Number of DTCs / 0 to 255 Number of DTCs will be displayed -

      • *1: w/ Intrusion Sensor

      • *2: w/ Sliding Roof System

      • *3: w/o Door Ajar Warning Buzzer Function

      • *4: Vehicles displaying the item "Security control with mechanism key" on the GTS

      • *5: w/ Glass Breakage Sensor

      • *6: w/ Panic Switch

      Note

      *7: Perform the intrusion sensor operation inspection with the GTS disconnected Click here.

  2. ACTIVE TEST

    Tech Tips

    Using the GTS to perform Active Tests allows relays, VSVs, actuators and other items to be operated without removing any parts. This non-intrusive functional inspection can be very useful because intermittent operation may be discovered before parts or wiring is disturbed. Performing Active Tests early in troubleshooting is one way to save diagnostic time. The Data List information can be displayed while performing Active Tests.


    1. Connect the GTS to the DLC3.

    2. Turn the engine switch on (IG).

    3. Turn the GTS on.

    4. Enter the following menus: Body Electrical / Main Body or Entry&Start / Active Test.

    5. According to the display on the GTS, perform the Active Test.

      Main Body
      Tester Display Test Part Control Range Diagnostic Note
      Security Horn2*1 Theft warning siren OFF/ON -
      Vehicle Horn Vehicle horns OFF/ON -
      Security Horn*3 Security horn OFF/ON -
      Power for Intrusion sensor*2 Intrusion and tilt sensor power supply OFF/ON -

      • *1: w/ Theft Warning Siren Assembly

      • *2: w/ Intrusion Sensor

      • *3: w/ Security Horn Assembly

      Entry & Start
      Tester Display Test Part Control Range Diagnostic Note
      Immobiliser Indicator Security indicator light OFF/ON -