BACK DOOR LOCK INSTALLATION

CAUTION / NOTICE / HINT

Note


  • When installing a new back door lock assembly, if there is any tape stuck to it, remove the tape.

  • When installing a new back door lock assembly, if there are any strings attached to it, cut the strings off.

PROCEDURE


  1. INSTALL BACK DOOR LOCK ASSEMBLY (w/o Power Back Door)


    1. A01WVHK

      Install the back door lock assembly with the 3 bolts.

      Text in Illustration
      B0018FC Bolt
      B00199O Connector
      Torque:
      13 N*m  { 133 kgf*cm, 10 ft.*lbf }

    2. Connect the connector.

  2. INSTALL BACK DOOR LOCK ASSEMBLY (w/ Power Back Door)


    1. A01WQN3

      Install the back door lock assembly with the 4 bolts.

      Text in Illustration
      B0018FC Bolt
      B00199O Connector
      Torque:
      13 N*m  { 133 kgf*cm, 10 ft.*lbf }

    2. Connect the 2 connectors.

  3. INSTALL BACK DOOR LOCK COVER


    1. A01WS7R

      Attach the 4 claws to install the back door lock cover.

  4. INSTALL BACK DOOR GARNISH

    Click here

  5. INSTALL BACK DOOR SIDE GARNISH RH

    Click here

  6. INSTALL BACK DOOR SIDE GARNISH LH

    Click here

  7. INSTALL CENTER BACK DOOR GARNISH

    Click here