WIRELESS DOOR LOCK CONTROL SYSTEM CUSTOMIZE PARAMETERS


  1. CUSTOMIZING WIRELESS DOOR LOCK CONTROL SYSTEM

    Tech Tips

    The following items can be customized.

    Note


    • When the customer requests a change in a function, first make sure that the function can be customized.

    • Be sure to make a note of the current settings before customizing.

    • When troubleshooting a function, first make sure that the function is set to the default setting.


    1. Customizing with the GTS


      1. Connect the GTS to the DLC3.

      2. Turn the engine switch on (IG).

      3. Turn the GTS on.

      4. Enter the following menus: Customize Setting/ Wireless Door Lock, PSD & PBD.

      5. Select the setting by referring to the table below.

        Wireless Door Lock
        Display Default Contents Setting
        Hazard Answer Back ON When the lock switch on the transmitter is pressed, this function illuminates the hazard warning lights once. When the unlock switch is pressed, the hazard warning lights illuminate twice. ON/OFF
        Wireless Control ON Function that turns the wireless door lock function ON or OFF. ON/OFF
        Open Door Warning*1 ON If a door is not completely closed and the transmitter lock switch is pressed, this function makes the buzzer sound for 5 seconds. ON/OFF
        Panic Function*2 ON Function to operate the theft deterrent system by continuously pressing the panic switch on transmitter for 2.5 seconds. ON/OFF
        Unlock 2 Operation ON Function that unlocks the driver side door when the unlock switch on the transmitter is pressed once, and unlocks all doors when the switch is pressed twice. If the setting is OFF, pressing the unlock switch once makes all the doors unlock. ON/OFF
        Auto Lock Time 30 s Function to change the time until relocking after unlocking with the wireless door lock function. 30 s/60 s/120 s
        Wireless Buzzer Resp*3 ON Wireless buzzer response function. ON/OFF
        P/W Wireless Ope Buzz*1 ON Wireless power window buzzer response. ON/OFF
        Wireless Buzzer Vol*4 Level 5 This function changes the wireless buzzer volume. Level 0/Level 1/Level 2/Level 3/Level 4/Level 5/Level6/Level 7

        • *1: w/ Door Ajar Warning Function

        • *2: w/ Panic Switch

        • *3: for vehicles displaying the item "Wireless Buzzer Resp" on the GTS

        • *4: w/ Wireless Door Lock Buzzer Answer-back Function

        PSD & PBD Operation (w/ Power Back Door)
        Display Default Contents Setting
        Wireless Power Back Door Open* Lock:OFF/Unlock:0.8s Function that operates the power back door by pushing the transmitter switch (electrical key transmitter sub-assembly). Lock:OFF/Unlock:OFF, Lock:OFF/Unlock:ON, Lock:OFF/Unlock:Twice, Lock:OFF/Unlock:0.8s, Lock:Twice/Unlock:Twice or Lock:0.8s/Unlock:0.8

        • *: "Lock:Twice/Unlock:Twice" and "Lock:0.8s/Unlock:0.8s" are only available for vehicles with the wireless one motion function.

    2. Customizing with the multi-display


      1. Turn the engine switch on (IG).

      2. Enter the following menus: SETUP / Vehicle / Vehicle customization / Door lock settings.

      3. Select the setting by referring to the table below.

        Display Default Contents Setting
        Remote 2-press unlock ON Function that unlocks the driver side door when the unlock switch on the transmitter is pressed once, and unlocks all doors when the switch is pressed twice. If the setting is OFF, pressing the unlock switch once makes all the doors unlock. ON/OFF
        Lock/unlock feedback-lights ON When the lock switch on the transmitter is pressed, this function illuminates the hazard warning lights once. When the unlock switch is pressed, the hazard warning lights illuminate twice. ON/OFF
        Lock/Unlock feedback-Tone* Level 5 This function changes the wireless buzzer volume. Level 0/Level 1/Level 2/Level 3/Level 4/Level 5/Level6/Level 7

        • *: w/ Wireless Door Lock Buzzer Answer-back Function