REAR DOOR LOCK INSPECTION

PROCEDURE


  1. INSPECT REAR DOOR LOCK ASSEMBLY LH


    1. Check the door lock motor operation.


      1. A01WS6YE03

        Apply battery voltage to the door lock connector and check the operation of the door lock.

        OK
        Measurement Condition Specified Condition

        Battery positive (+) → 4 (L)

        Battery negative (-) → 3(UL)

        		 Lock

        Battery positive (+) → 3(UL)

        Battery negative (-) → 4 (L)

        		 Unlock
        Text in Illustration
        *a Unlock
        *b Lock
        *c

        Component without harness connected

        (Rear Door Lock Assembly LH)

        • If the result is not as specified, replace the door lock assembly LH.

    2. Check the detection switch.


      1. Measure the resistance according to the value(s) in the table below.

        Standard Resistance
        Tester Connection Switch Condition Specified Condition
        6 (LSSR) - 9 (E) Unlock Below 1 Ω
        6 (LSSR) - 9 (E) Lock 10 kΩ or higher

        • If the result is not as specified, replace the door lock assembly LH.

  2. INSPECT REAR DOOR LOCK ASSEMBLY RH


    1. Check the door lock motor operation.


      1. A01WS3RE03

        Apply battery voltage to the door lock connector and check the operation of the door lock.

        OK
        Measurement Condition Specified Condition

        Battery positive (+) → 2 (L)

        Battery negative (-) → 1 (UL)

        		 Lock

        Battery positive (+) → 1 (UL)

        Battery negative (-) → 2 (L)

        		 Unlock
        Text in Illustration
        *a Unlock
        *b Lock
        *c

        Component without harness connected

        (Rear Door Lock Assembly RH)

        • If the result is not as specified, replace the door lock assembly RH.

    2. Check the detection switch.


      1. Measure the resistance according to the value(s) in the table below.

        Standard Resistance
        Tester Connection Switch Condition Specified Condition
        6 (LSSR) - 9 (E) Unlock Below 1 Ω
        6 (LSSR) - 9 (E) Lock 10 kΩ or higher

        • If the result is not as specified, replace the door lock assembly RH.