CLEARANCE WARNING BUZZER INSTALLATION

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedures for LHD and RHD vehicles.

  • The procedures listed below are for LHD vehicles.

PROCEDURE


  1. INSTALL NO. 1 CLEARANCE WARNING BUZZER


    1. for LHD:


      1. A01WSMO

        Attach the clip to install the No. 1 clearance warning buzzer.

      2. Connect the connector.

    2. for RHD:


      1. A01WTYH

        Attach the clip to install the No. 1 clearance warning buzzer.

      2. Connect the connector.

  2. INSTALL INSTRUMENT PANEL BOX ASSEMBLY (for RHD)

    Click here

  3. INSTALL LOWER NO. 1 INSTRUMENT PANEL FINISH PANEL

    Click here

  4. INSTALL LOWER INSTRUMENT PANEL PAD SUB-ASSEMBLY LH

    Click here

  5. INSTALL NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY

    Click here

  6. INSTALL NO. 1 SWITCH HOLE BASE

    Click here

  7. INSTALL INSTRUMENT SIDE PANEL LH

    Click here