ANTENNA DIVIDER INSTALLATION

PROCEDURE


  1. INSTALL ANTENNA DIVIDER


    1. B0018RS

      Install the antenna divider with the nut.

      Torque:
      8.5 N*m  { 87 kgf*cm, 75 in.*lbf }

  2. INSTALL NO. 1 TELEPHONE BRACKET


    1. B001947

      Install the No. 1 telephone bracket with the 3 bolts.

      Torque:
      8.5 N*m  { 87 kgf*cm, 75 in.*lbf }

    2. Connect the connectors.

  3. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

  4. INSTALL UPPER RADIATOR SUPPORT SEAL

    Click here

  5. CHECK SRS WARNING LIGHT


    1. Check the SRS warning light Click here.

  6. PERFORM REGISTRATION


    1. w/ Telematics Transceiver for G-BOOK

      Perform registration Click here.

      Note

      When replacing the telematics transceiver, perform registration.

    2. w/ Telematics Transceiver except G-BOOK

      Perform registration Click here.

      Note

      When replacing the telematics transceiver, perform registration.