MAYDAY BATTERY INSTALLATION

PROCEDURE


  1. INSTALL MAYDAY BATTERY


    1. Install the mayday battery to the No. 3 telephone bracket.

    2. Connect the connector.

    3. B00184H

      Align the bracket, 2 claws and the nut attachment shaft, and assembly the mayday battery and bracket together.

    4. Install the No. 3 telephone bracket with mayday battery with the nut.

      Torque:
      12 N*m  { 122 kgf*cm, 9 ft.*lbf }

  2. INSTALL NO. 1 TELEPHONE BRACKET WITH TELEMATICS TRANSCEIVER


    1. Install the telephone bracket with telematics transceiver with the 3 bolts.

      Torque:
      12 N*m  { 122 kgf*cm, 9 ft.*lbf }

    2. Connect the connectors.

  3. INSTALL REAR CONSOLE END PANEL SUB-ASSEMBLY

    Click here

  4. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

  5. INSTALL UPPER RADIATOR SUPPORT SEAL

    Click here

  6. CHECK SRS WARNING LIGHT


    1. Check the SRS warning light Click here.