REMOTE TOUCH INSTALLATION

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for RHD and LHD vehicles.

  • The procedure listed below is for LHD vehicles.

PROCEDURE


  1. INSTALL REMOTE OPERATION SWITCH

  2. INSTALL REMOTE OPERATION BOARD


    1. A01WTI9

      Connect the connector.

    2. Move the remote operation board as shown in the illustration.

    3. A01WT9H

      Install the 4 screws.

  3. INSTALL SWITCH KNOB


    1. A01WT8DE01

      Push on the switch knob to install it.

      Tech Tips

      Make sure the orientation of the switch knob is correct when installing it.

  4. INSTALL COVER ASSEMBLY LH


    1. A01WR67E03

      Attach the 2 claws and 2 clips to install the cover assembly LH.

      Tech Tips

      Attach the claws and clips in the order shown in the illustration.

  5. INSTALL REMOTE TOUCH ASSEMBLY


    1. A01WVRU

      Attach the 6 claws and clip to install the remote touch assembly.

  6. INSTALL UPPER CONSOLE PANEL SUB-ASSEMBLY

    Click here

  7. INSTALL SHIFT LEVER KNOB SUB-ASSEMBLY

    Click here

  8. INSTALL INSTRUMENT PANEL FINISH PANEL END LH

    Click here

  9. INSTALL INSTRUMENT PANEL FINISH PANEL END RH

    Click here

  10. INSTALL LOWER CENTER INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY

    Click here