HARD DISK DRIVE INSTALLATION

PROCEDURE


  1. INSTALL HARD DISC


    1. B001869

      Push the hard disc in the direction of the arrow shown in the illustration to install it.

    2. B0019OW

      Install the cover in the direction of the arrow shown in the illustration.

    3. Install the 3 screws.

  2. INSTALL NO. 2 RADIO BRACKET

    Click here

  3. INSTALL MULTI-MEDIA MODULE RECEIVER ASSEMBLY WITH BRACKET

    Click here

  4. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.