HARD DISK DRIVE REMOVAL

PROCEDURE


  1. PRECAUTION

    Note

    After turning the ignition switch off, waiting time may be required before disconnecting the cable from the battery terminal. Therefore, make sure to read the disconnecting the cable from the battery terminal notice before proceeding with work Click here.

  2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

  3. REMOVE MULTI-MEDIA MODULE RECEIVER ASSEMBLY WITH BRACKET

    Click here

  4. REMOVE NO. 2 RADIO BRACKET

    Click here

  5. REMOVE HARD DISC


    1. B0019NR

      Remove the 3 screws.

    2. B001AI7

      Move the cover in the direction of the arrow shown in the illustration to remove it.

    3. B001AUX

      Move the cover in the direction of the arrow shown in the illustration to remove it.