INSTRUMENT PANEL SPEAKER INSPECTION

PROCEDURE


  1. INSPECT FRONT NO. 2 SPEAKER ASSEMBLY


    1. A01WTB3E10
      *1 Component without harness connected: (Front No. 2 Speaker)

      Measure the resistance according to the value(s) in the table below.

      Standard Resistance
      Tester Connection Condition Specified Condition
      1 - 2 Always Below 1 Ω*1
      3 - 4 Always Below 1 Ω*1
      2 - 4 Always 4 Ω*1
      1 - 2 Always Below 1 Ω*2
      3 - 4 Always Below 1 Ω*2
      2 - 4 Always 6 Ω*2

      • *1: for 9 Speakers

      • *2: for 19 Speakers

      If the result is not as specified, replace the front No. 2 speaker assembly.

  2. INSPECT FRONT NO. 4 SPEAKER ASSEMBLY

    A01WSUEE24
    *1 Component without harness connected: (Front No. 4 Speaker)

    1. Measure the resistance according to the value(s) in the table below.

      Standard Resistance
      Tester Connection Condition Specified Condition
      1 - 2 Always 6 Ω

      If the result is not as specified, replace the front No. 4 speaker assembly.