INSTRUMENT PANEL SPEAKER INSTALLATION

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedures for the LH side and RH side.

  • The procedures listed below are for the LH side.

  • A bolt without a torque specification is shown in the standard bolt chart Click here.

PROCEDURE


  1. INSTALL FRONT NO. 2 SPEAKER ASSEMBLY


    1. Connect the connector.

    2. Temporarily install the speaker by aligning speaker with the positioning pins of the instrument panel.

    3. Install the speaker with the 2 bolts.

      Note


      • Do not touch the cone part of the speaker.

      • When installing the speaker to the instrument panel, be careful that the wires do not get caught between parts.

      B001A2DE03
      *1 for 19 Speakers:
      *2 for 9 Speakers:

  2. INSTALL NO. 1 INSTRUMENT PANEL SPEAKER PANEL SUB-ASSEMBLY

  3. INSTALL FRONT PILLAR GARNISH LH

    Click here

  4. INSTALL ASSIST GRIP SUB-ASSEMBLY

    Click here

  5. INSTALL FRONT NO. 4 SPEAKER ASSEMBLY


    1. Connect the connector.

    2. Temporarily install the speaker by aligning speaker with the positioning pins of the instrument panel.

    3. B0018GU

      Install the speaker with the 2 bolts.

      Note


      • Do not touch the cone part of the speaker.

      • When installing the speaker to the instrument panel, be careful that the wires do not get caught between parts.

  6. INSTALL NO. 1 SPEAKER OPENING COVER ASSEMBLY

  7. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

  8. INSTALL UPPER RADIATOR SUPPORT SEAL

    Click here