REAR DOOR SPEAKER INSTALLATION

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedures for the LH side and RH side.

  • The procedures listed below are for the LH side.

PROCEDURE


  1. INSTALL REAR NO. 3 SPEAKER ASSEMBLY (for 19 Speakers)


    1. B0018UE

      Install the speaker with the 4 screws.

      Note

      Do not touch the cone part of the speaker.

  2. INSTALL REAR NO. 2 SPEAKER ASSEMBLY (for 19 Speakers)


    1. B001AQY

      Install the speaker with the 2 screws.

      Note

      Do not touch the cone part of the speaker.

    2. Attach the clamp and connect the connectors.

  3. INSTALL REAR SPEAKER SET


    1. Temporarily install the speaker by attaching the claw of the speaker to the door panel.

    2. Install the speaker with the 3 screws.

      Note

      Do not touch the cone part of the speaker.

    3. Connect the connector.

      B001AXWE03
      *1 for 19 Speakers:
      *2 for 9 Speakers:

  4. INSTALL REAR DOOR TRIM BOARD SUB-ASSEMBLY

    Click here

  5. INSTALL DOOR ASSIST GRIP COVER RH

    Click here

  6. INSTALL REAR DOOR UPPER ARMREST BASE PANEL LH

    Click here

  7. INSTALL REAR DOOR INSIDE HANDLE BEZEL PLUG LH

    Click here

  8. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

  9. INSTALL UPPER RADIATOR SUPPORT SEAL

    Click here