CAUTION / NOTICE / HINT
Tech Tips
Use the same procedures for the LH side and RH side.
The procedures listed below are for the LH side.
PROCEDURE
REMOVE UPPER RADIATOR SUPPORT SEAL
DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
Note
When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.
REMOVE REAR DOOR INSIDE HANDLE BEZEL PLUG LH
REMOVE REAR DOOR UPPER ARMREST BASE PANEL LH
REMOVE DOOR ASSIST GRIP COVER LH
REMOVE REAR DOOR TRIM BOARD SUB-ASSEMBLY
REMOVE REAR SPEAKER SET
Disconnect the connector.
Remove the 3 screws.
Detach the claw and remove the speaker.
Note
Do not touch the cone part of the speaker.
| *1 | for 19 Speakers: |
| *2 | for 9 Speakers: |
REMOVE REAR NO. 2 SPEAKER ASSEMBLY (for 19 Speakers)
Disconnect the connectors.
Detach the clamp.
Remove the 2 screws and speaker.
Note
Do not touch the cone part of the speaker.
REMOVE REAR NO. 3 SPEAKER ASSEMBLY (for 19 Speakers)
Remove the 4 screws and speaker.
Note
Do not touch the cone part of the speaker.