CAUTION / NOTICE / HINT
Tech Tips
Use the same procedures for the LH side and RH side.
The procedures listed below are for the LH side.
PROCEDURE
REMOVE UPPER RADIATOR SUPPORT SEAL
DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
Note
When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.
REMOVE FRONT LOWER DOOR FRAME BRACKET GARNISH LH
REMOVE FRONT DOOR INSIDE HANDLE BEZEL PLUG LH
REMOVE FRONT UPPER ARMREST BASE PANEL LH
REMOVE FRONT DOOR TRIM BOARD SUB-ASSEMBLY LH
REMOVE FRONT NO. 1 SPEAKER ASSEMBLY
Disconnect the connector.
Remove the 4 screws and speaker.
Note
Do not touch the cone part of the speaker.