AUDIO AND VISUAL SYSTEM CUSTOMIZE PARAMETERS

PROCEDURE

1. CUSTOMIZING WITH ACCESSORY METER ASSEMBLY

   
   

   1. Turn the engine switch on (IG).

   2. Using the accessory meter assembly, select "Setup", "General", and then "Feedback Force" and change the customize setting.

      Display	Default	Content	Setting	Relevant ECU
      Feedback Force	0 (middle bar)	Feedback force setting of the remote touch*	-2, -1, 0, +1 or +2	Multi-media module receiver assembly
      			NO FEEDBACK FORCE/ LEVEL1/LEVEL2/ LEVEL3/LEVEL4

      Tech Tips

      *: The higher the set value, the stronger the remote touch feedback force becomes.