STEERING HEATER SWITCH INSPECTION

PROCEDURE


  1. INSPECT REFRESHING SEAT SWITCH (for RHD)


    1. A01WUKLE02
      *1 Component without harness connected (Steering Heater Switch)
      *2 SWSH

      Measure the resistance according to the value(s) in the table below.

      Standard Resistance
      Tester Connection Switch Condition Specified Condition
      14 (SWSH) - 2 (E) Steering heater switch is pushed Below 1 Ω
      Steering heater switch is not pushed 10 kΩ or higher

      If the value is not as specified, replace the switch.

  2. INSPECT REFRESHING SEAT SWITCH (for LHD)

    Tech Tips

    Refer to "Steering When does not Heat Up When Heated Steering When Switch is Pressed"

    Click here