TILT AND TELESCOPIC MANUAL SWITCH INSTALLATION

PROCEDURE

1. INSTALL TILT AND TELESCOPIC MANUAL SWITCH

   
   

   1. Attach the claw to install the switch.

   2. Connect the switch connector.

2. INSTALL LOWER STEERING COLUMN COVER

   
   

   1. Attach the 2 claws to install the lower steering column cover.

   2. Install the 3 screws.

      Tech Tips

      Turn the steering wheel to the right and left as necessary to install the 2 screws.

3. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

   Note

   
   

   • Reset the AUTO TILT AWAY function setting to the previous condition by changing the customize parameter Click here.

   • When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

4. CHECK SRS WARNING LIGHT

   Click here