VARIABLE GEAR RATIO STEERING SYSTEM, Diagnostic DTC:C15B1/71, C15B2/72, C15B3/73, C15B5/82, C15B6/83
| DTC Code | DTC Name |
|---|---|
| C15B1/71 | ECU Malfunction(CPU) |
| C15B2/72 | ECU Malfunction(Internal Line) |
| C15B3/73 | ECU Malfunction(Substrate Temperature Sensor) |
| C15B5/82 | ECU Malfunction(Flash Memory) |
| C15B6/83 | ECU Malfunction(EEPROM) |
DESCRIPTION
If the VGRS ECU (steering control ECU) detects an internal malfunction, it turns the master warning light on, and stores these DTCs.
When DTC C15B3/73 is stored, the master warning light is not illuminated and the VGRS system continues to operate.
| DTC No. | DTC Detection Condition | Trouble Area |
|---|---|---|
| C15B1/71 | When the engine switch is turned on (IG), the VGRS ECU (steering control ECU) detects an internal malfunction. | VGRS ECU (steering control ECU) |
| C15B2/72 | When the engine switch is turned on (IG), the VGRS ECU (steering control ECU) detects an internal malfunction. | VGRS ECU (steering control ECU) |
| C15B3/73 | When the engine switch is turned on (IG), the VGRS ECU (steering control ECU) detects an internal malfunction. | VGRS ECU (steering control ECU) |
| C15B5/82 | When the engine switch is turned on (IG), the VGRS ECU (steering control ECU) detects an internal malfunction. | VGRS ECU (steering control ECU) |
| C15B6/83 | When the engine switch is turned on (IG), the VGRS ECU (steering control ECU) detects an internal malfunction. | VGRS ECU (steering control ECU) |
CAUTION / NOTICE / HINT
Note
When replacing the VGRS ECU (steering control ECU), perform actuator angle neutral point calibration and initialization after replacement Click here.
PROCEDURE
-
REPLACE VGRS ECU (STEERING CONTROL ECU)
-
Replace the VGRS ECU (steering control ECU) (for LHD: See page , for RHD: Click here.
NEXT 
END
-