POWER STEERING ECU(for LHD) INSTALLATION

PROCEDURE

1. INSTALL POWER STEERING ECU ASSEMBLY

   
   

   1. Attach the claw and install the power steering ECU with the bolt.

      Torque:

      8.0 N*m  { 82 kgf*cm, 71 in.*lbf }

   2. Connect the connectors.

   3. Install the power steering ECU assembly with junction block with the bolt and nut.

      Torque:

      7.6 N*m  { 77 kgf*cm, 67 in.*lbf }

2. INSTALL LOWER NO. 2 INSTRUMENT PANEL FINISH PANEL

   Click here

3. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

   Note

   When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

4. CHECK SRS WARNING LIGHT

   Click here