STEERING ACTUATOR REMOVAL

CAUTION / NOTICE / HINT

CAUTION:

Some of these service operations affect the SRS airbag system. Read the precautionary notices concerning the SRS airbag system before servicing the steering column Click here.

Tech Tips


  • Use the same procedure for RHD and LHD vehicles.

  • The procedure listed below is for LHD vehicles.

PROCEDURE


  1. REMOVE STEERING COLUMN ASSEMBLY

    Click here

  2. REMOVE STEERING ACTUATOR ASSEMBLY

    A01WQMJ

    1. While pushing the claws on both sides of the connector, move the lock in the direction of the arrow.

    2. Disconnect the connector.

    3. A01WUQK

      Hold the clamp with needle nose pliers, then insert a screwdriver and turn it in the direction shown in the illustration to remove the clamp of the steering column hole cover.

    4. Remove the front wheel LH side.

    5. A01WRJCE06
      *1 Matchmark

      Put matchmarks on the steering actuator and No. 2 steering intermediate shaft.

    6. Remove the bolt, and then pull out the actuator assembly toward the inside of the vehicle.